Introduction
The Arduino reference design files (schematic and board layout) are available on the Arduino web site, but several hobbyists have also asked for a detailed parts list that can be used to build boards based on the open-source Arduino design. We’ve tried to come up with a list of parts that can be used to build an Arduino, based on inexpensive low-volume purchases from popular distributors.
Some parts have multiple options listed to provide diversity in case of part shortages, and to simplify ordering from single distributors.
If you have any additions or corrections, please send them to <support@ruggedcircuits.com>. We tried our best to list parts that will work, but there is no guarantee we got it right. Use this information at your own risk.
|
Arduino Uno R3 Through-Hole
|
ODS
|
XLS
|
|
|
